Many years ago Mal Wood Auto found the need to design and market a Remote Bleed to allow for the easy bleeding of the clutch on a T56.

The factory designed bleeder finishes flush with the bellhousing, and when bleeding the clutch the fluid runs out the bottom of the bellhousing, with the added risk of contaminating your clutch.
The Mal Wood Auto Braided Remote Bleed is an innovative design, and continues to be very popular. Others have copied the idea but nothing is as good as the original.
Mal Wood Auto now has a large range of Braided lines to suit most transmission applications.
The Braided Remote Bleed is great value at $145.
Mal Wood Innovations
Mal Wood Automotive designed and manufactured the Pedal Pin kit for the
E-Series, XG-XH, and the AU Falcon.

This is a direct bolt in pin that allows the fitting of a clutch pedal to an Auto pedal carrier, saving around 5 hours removing the dash and fitting a Manual pedal box.
The cost for the Pedal Pin kit is $105.
Mal Wood Automotive have designed an Underdash Hydraulic Pedal Kit, which is a great upgrade over earlier hydraulic setups. This unit is an easy bolt-in, fitting under the dash. and housing the Master Cylinder. The reservoir mounts neatly in the engine bay.

The Mal Wood Automotive Underdash Hydraulic Pedal kit is a must when fitting Manual transmissions with Internal Hydraulic Release Bearing, and is far superior to anything else offered.
Kits available to suit.....
  • HQ, HJ, HX, HZ, WB  Holdens and LH, LX, UC  Toranas @ $790
  • XG, XH, EA-EL, AU Fords @ $790
  • VN-VS Commodores
  • RHD Mustang, but must be fitted in shop POA
  • Valiant and Charger, but must be fitted in shop POA

We are constantly trying to develop more kits to suit the market. If your vehicle is not listed above, please don't hesitate to contact us.
Pedals